Using iOS Monitor in Eggplant Performance

The iOS monitor type collects measurements from an iOS device, by connecting to the eggMonitor app installed and running on the device. eggMonitor will listen for connections from an Eggplant Performance monitor, and will then transmit measurements back from the iOS device to Eggplant Performance.

iOS monitoring architecture in Eggplant Performance

Monitoring connection settings for iOS

For information about the Poll Interval and Injector fields, see Connection Settings.

At this point in the wizard, the target iOS device should be switched on, connected to the network and the eggMonitor app should be running. The next step in the wizard will try and connect to the device.

The value in the Port field must match the value shown in the eggMonitor app on the target iOS device.

eggMonitor for iPhone and iPad

Note: The eggMonitor app only supports devices running iOS 7 and later.

Installing

Download eggMonitor from the Eggplant website. You can install it on the iOS device using iTunes.

  1. In iTunes, go to File > Add to library.
  2. Monitoring iOS app in iTunes

  3. On the On This iPhone/iPad screen, click the Apps tab.
  4. Select the eggMonitor app, and then click Install.
  5. Monitoring iOS app in iTunes

  6. After the iOS device syncs with iTunes, the app appears on the home screen.

    monitoring_iOS-app-home

Using the App

The app has a single screen.

monitoring_iOS-app-screenshot

The IP address of the device appears at the top. This is useful when filling in the Host field on the Create a monitoring target page of the Add Monitors wizard.

The port can be configured while the app is not listening for connections. The port chosen in the app is what should be entered in the Port field on the Connection settings page of the Add Monitors wizard.

Toggle the switch to enable or disable listening for connections from an Eggplant Performance injector.

Note: While listening for connections, the eggMonitor app plays a beep sound every few minutes. This allows the app to continue monitoring in the background while a different app is being tested.

 

This topic was last updated on August 19, 2021, at 03:30:52 PM.

Eggplant icon Eggplantsoftware.com | Documentation Home | User Forums | Support | Copyright © 2022 Eggplant