Lists
Lists and property lists provide two convenient and powerful ways to organize and manipulate data within your scripts. This section presents the key things you must know to fully exploit the power of lists.
For more information about working with lists, see Chunk Expressions, and the control structure discussion in Repeat with Each.
In addition to lists and property lists, SenseTalk provides a hierarchical tree structure, which is described in Using XML and Tree Structures in SenseTalk Scripts.
Creating Lists
Create a list in a script by listing one or more expressions separated by commas and enclosed in square brackets [ ]. Lists can also be enclosed in parentheses ( ) if the entire list is on a single line. Lists that are enclosed in square brackets may be written across multiple lines by including a line break after any item within the list (this will not work for lists enclosed in parentheses). Using square brackets is recommended as it makes the list syntax clear and consistent, as well as distinct from other script elements.
Syntax:
[ expr { , expr}... ]
( expr { , expr}... )
{ expr { , expr}... }
[ ]
{an} empty list
Prior to SenseTalk 2.00 (Eggplant Functional 20.1), both lists and property lists used parentheses () by default instead of square brackets [] or curly braces (respectively). Parentheses are still considered valid syntax for lists, but their use is not recommended as it can lead to confusion.
Example:
put [1,3,5,7,9] into oddList
Example:
put [["dog", "Fido"], ["cat", "Cleo"]] into nestedList // Creates a list of lists
Example:
set myList to ["sandwich",49,the date]
Example:
set TestEnvironments = ["Windows","MacOSX","Android","iOS"]
Example:
Lists can also span multiple lines using square [] brackets:
set searchPaths to [
"/Library/WebServer/Documents",
"~/Documents",
"/Users/hemingway/Documents/temp/ImportantStuff" ]
Lists, including lists containing other lists or property lists, can be passed as parameters. For more on lists as parameters, see Parameters and Results.
List Contents
Include any type of value in a list, including other lists and property lists.
You can also use expressions when constructing lists:
Example:
put ["geranium", pi * (2 * radius), {age:42}] into mixedList // "pi_* (2 * radius)" is an expression, and "{age:42}" is a property list
Example:
put [1,[2,[3,4]],5] into nestedList // Stores the list '[1,[2,[3,4]],5]' into a variable.
Single-Item Lists
Single item lists made using square brackets [] are identified as a list by SenseTalk. No commas are required, because the square brackets indicate that the single item is a list.
Example:
put [12] into shortList // This makes a list with one item
When a single value is enclosed in parentheses in a script, the parentheses are treated as a grouping operator, so that value will not be treated as a list. To make SenseTalk recognize a single item in parentheses as a list, include a comma after the value:
Example:
put (12,) into shortList // This makes a list with one item
Treatment of Single-Item Lists as a Single Value
For many purposes, a list containing a single item can be treated the same as a single (non-list) value.
Example:
In the example below, myList is set to [4], that is, a list containing a single item that is the number 4. Another number is added to this value as if it were a non-list value. Following this basic arithmetic, the variable theSum contains the number 6.
put [4] into myList -- Creates a single-item list
put myList + 2 into theSum -- This will add 2 to the single list item '4' as if it were a single non-list value
put theSum --> 6
Normally, when accessing such a list as text, the value shows in square brackets. To avoid this behavior, set the prefix and suffix properties of the listFormat to empty.
Empty Lists
To create an empty list, use an empty pair of square brackets, or the phrase empty list:
Example:
put [] into newlist // newlist is now a list with no items
put 16 into item 1 of newlist // [16]
put empty list into item 2 of newlist // [16,[]]
Inserting Items into a List
Use the Insert Command to insert items before, into, or after a list or any item of a list. Insert always treats the destination container as a list, and will turn it into a list if it is not one already.
Example:
put "abc" into myVar // Stores 'abc' in a variable as text (not actually a list)
put "de" after myVar // Appends 'de' to 'abc' resulting in 'abcde' (still not a list)
insert "xyz" after myVar // Creates a list using the myVar variable contents 'abcde' as the first list item, and 'xyz' as the second, resulting in the list ["abcde","xyz"]
insert 24 before item 2 of myVar // Inserts an additional item into the list, resulting in the list ["abcde",24,"xyz"]
Example:
put "First, let's connect to our SUT." into instructions // Populates variable instructions with a text string
insert "Next, let's enter Capture Mode." after instructions // Inserts a second text string in order to create a list
put instructions // Displays [First, let's connect to our SUT. Next let's enter Capture Mode.], which appears like a 4-item list based on comma position but is actually a 2-item list
set the listFormat to {prefix:"(",suffix:")",separator:"|"} // Changes the listFormat to separate list items with | instead of comma
put instructions // Displays (First, let's connect to our SUT.|Next, let's enter Capture Mode.) making it clear there are only 2 items in the list and not 4
When inserting a list of items into another list, there are two possible ways to complete the insertion. The default mode, known as “item by item," is to insert each item from the source list into the destination list:
Example:
put [1,2,3,4] into list // [1,2,3,4]
insert [A,B] after item 2 of list // Item 2 of list // -- [1,2,A,B,3,4]
It is also possible to insert a list into another to create a nested list by using the nested keyword:
Example:
put [1,2,3,4] into list // [1,2,3,4]
put ["A","B"] into otherList // [A,B]
insert otherList nested after item 2 of list // [1,2,[A,B],3,4]
To control the standard insertion behavior, set the listInsertionMode local property or the defaultListInsertionMode global property to either "nested" or "item by item":
Example:
put [1,2,3] into aList
set the listInsertionMode to "nested"
insert [4,5] into aList // [1,2,3,[4,5]]
See the Insert Command for more information.
Push, Pull, and Pop
The Push Command is synonymous with the insert command. The Pop Command removes the last value from a list and stores it into a variable. The push and pop commands treat a list as a stack. Items pushed onto the stack can be retrieved in the reverse order with the pop command.
Example:
put ["carrots","bananas","pistachios"] into GroceryList
pop GroceryList into gList
put gList --> "pistachios"
The Pull Command removes the first value from a list and stores it into a variable. The push and pull commands treat a list as a queue. The pull command retrieves items one at a time in the same order that they were added to the queue by the push command.
Example:
put ["carrots","bananas","pistachios"] into GroceryList
pull GroceryList into gList
put gList --> "carrots"
You can specify which items to pop or pull from a list, as well.
Example:
put ["carrots","bananas","pistachios","lettuce","wasabi"] into GroceryList
pull item 4 of GroceryList into gList
put gList --> "lettuce"
Combining Lists
To join two lists as one (without nesting), use the &&& operator.
Example:
put [3,4,5] into tr1 // [3,4,5]
put [5, 12,13] into tr2 // [5,12,13]
put tr1 &&& tr2 into longList // Creates one, not-nested list [3,4,5,5,12,13]
put [tr1,tr2] into twoTriples // Creates a nested list - a list of two lists [[3,4,5],[5,12,13]]
Accessing List Items
Accessing items within lists, including ranges of items and lists of items, is fully supported using the item and items chunk expressions (or their more explicit forms, list item and list items). Accessing a single item yields the item at that index. Accessing a range of items always yields a list, even when the range specifies a single item:
Example:
put [1,2,3,4,5] into NumberList // [1,2,3,4,5]
put list items 3 to last of NumberList --> [3,4,5]
put item 2 of NumberList --> 2
put items 2 to 2 of NumberList --> [2] (a single-item list)
put items [4,2,5] of NumberList --> [4,2,5]
Example:
put ["cheddar","provolone","brie","muenster","mozzarella"] into CheeseList
put the penultimate item of CheeseList --> "muenster"
put item random(5) of CheeseList // Displays a random item from the list
put "My favorite cheese is " & the third item of CheeseList & period --> "My favorite cheese is brie."
By default, the item term refers to text items rather than list items if the variable in question is not known to be a list. Using the explicit term list item always treats the variable as a list even if it contains a non-list value (in which case it will be treated like a one-item list containing that value).
Example:
put <<"Welcome to Mars", said the alien.>> into NotList
put item 1 of NotList --> "Welcome to Mars"
put list item 1 of NotList --> "Welcome to Mars", said the alien.
Converting Lists to Text
The split and join commands and functions and the asText function, described in detail in Working with Text, and the corresponding split by and joined by operators (described in Expressions) provide ways to explicitly convert text to lists and vice versa.
Example:
join ["peanut butter","bread","jelly"] using "," // Creates the string 'peanut butter,bread,jelly'
When a list needs to be accessed as text (such as when it is displayed by a put command), SenseTalk converts it automatically to a text representation. By default, this conversion is done by enclosing the entire list in parentheses, with the items in the list separated by commas. To change this formatting approach, set the prefix, separator, and suffix values of the listFormat global property. The prefix is the text that is used before the list (usually a left parenthesis), separator is the text inserted between items, and suffix is the text appended after the list. Set these values to any text you like, including empty.
Example:
set the listFormat to {prefix:"<<", separator:":", suffix:">>"}
put [1,2,3,4,5] // converts the list to a text representation and displays <<1:2:3:4:5>>
Example:
put {prefix:"+",suffix:"+",separator:empty} into the ListFormat
set Weather to ["windy","rainy","sunny"]
put items 2 to 3 of Weather // displays: '+rainysunny+'
When a list is converted to text, each value within the list is converted to a text representation. To control the quoting of these values, set the quotes value of the listFormat global property. For more information about this property, see the listFormat.
Converting Text to Lists
The split and join commands and functions and the asText function, described in detail in Working with Text, and the corresponding split by and joined by operators (described in Expressions) provide ways to explicitly convert text to lists and vice versa.
Example:
split "Peter-Paul-Mary" by "-" // Creates the list '[Peter,Paul,Mary]'
When using comma delimited .txt or CSV files in data driven testing, each line of the data file that SenseTalk accesses is a text string rather than a list. This statement is true even if the text string appears to be formatted like a list within the data file. SenseTalk's ability to access and iterate over items within a text string means that no special handling of the input from the file is necessary if you want to treat its contents as if they were lists. However, understanding that you are not actually dealing with a list in these cases can be important in certain situations.
Example:
put [2 ounces,3 ounces,4 ounces] into SizesList
put SizesList * [.5,.2,.7] // Displays the list '[1 ounce,0.6 ounces,2.8 ounces]'.
put line 1 of file resourcePath("sizes.txt") into SizesFile // Line 1 of file sizes.txt contains '2 ounces,3 ounces,4 ounces', which is a text string
put SizesFile * [.5,.2,.7] // The content of the input is not a number and SenseTalk cannot take its value, so the SenseTalk code throws an error when executed
Use the standardFormat function to convert a list to text in a format that will produce the original list again when that text is evaluated by the value function.
Example:
put ["peanut butter","bread","jelly"] into Sandwich
put standardformat(Sandwich) into newSandwich //Converts the list into text
put value(newSandwich) into Sandwich // Converts the text into a list
Converting Text Representations to List Structures
In rare circumstances when accessing a list as text, such as with the put or log commands, SenseTalk's automatic conversion of the list into a text representation results in a simplified but undesired structure. Use the asList() to produce the requested list structure, letting SenseTalk display the list in a list-like format. See as operator for more information.
Example:
put "1".."9" into NumberList // creates a range
log NumberList // displays '1 to 9'
log NumberList as a list // displays '[1,2,3,4,5,6,7,8,9]'
It is possible to reference text items in chunk types. However, this does not mean that the text is a list. The asList() function can be used to convert text into a list, which changes how items are defined and accessed.
Example:
put "A man, a plan, a canal. Panama!" into Palindrome // Stores the text string in a variable. This is not a list.
put the number of items of Palindrome // Returns 3 as there are 3 text items in the text, delimited by comma
put Palindrome is a list // Checks whether Palindrome is a list. Returns False, as the contents are text rather than a list.
put Palindrome as a list into PalindromeList // Stores the text as a list into a new variable
put PalindromeList is a list // Checks whether PalindromeList is a list. Returns True.
put the number of items of PalindromeList // Returns 1, as the list now just contains one item, 'A man, a plan, a canal. Panama!'
Automatic Conversion of Values Within a List
SenseTalk is a typeless language. As such, SenseTalk automatically converts values, including values stored in a list, to an appropriate internal representation.
Example:
put [5 pounds 3 ounces, ten feet 5 inches, 400 megabytes and 12 kilobytes] into ValuesList // Automatically converts the values in the list, resulting in the list '[5.1875 pounds,10.416667 feet,409612 kilobytes]'
put ["5 pounds 3 ounces","ten feet 5 inches","400 megabytes and 12 kilobytes"] into StringsList // The list contains text strings, which aren't converted. Results in the list '["5 pounds 3 ounces","ten feet 5 inches","400 megabytes and 12 kilobytes"]'.
Replacing Items in a List
While the insert command is specifically tailored for working with lists, it only adds new values into a list. To replace existing items in a list with new values, use the set or put into commands.
Note: Unlike put into, the put before and put after commands are rarely used with lists. Their behavior when the destination is a list is to concatenate a text value before or after the first or last item of the list. More often what is wanted is to insert new items before or after a list, using the insert before and insert after commands.
Using the put into or set commands to put one or more new values into a list replaces the entire contents of the destination with the new values. The final result can take several forms:
If the destination container is a variable, SenseTalk discards that variable’s previous contents and replaces it with a copy of the new value(s).
Example:
put "good morning" into greetings
put ["hello","hola"] into greetings // Replaces the previous string stored in variable greetings
log greetings // Logs '[hello,hola]'
If the source is a single value and the destination is a single item or a range of items within a list, those items, as a whole, are replaced by the new value:
Example:
put [1,2,3,4] into aList
put 99 into items 2 to 3 of aList // Results in the list '[1,99,4]'
If the new value is a list rather than a single value, the result is a nested list if the destination is a single item:
Example:
put ["hazel","black","blue"] into eyeColors
put ["green","brown"] into the first item of eyeColors // Results in the list '[[green,brown],black,blue]'
If the destination is a range of items (even a 1-item range), those items are replaced by the new values:
Example:
put [1,2,3,4] into aList
put ["a","b","c"] into items 2 to 3 of aList // Results in the list '[1,a,b,c,4]'
put ["x","y"] into items 1 to 1 of aList // Results in the list '[x,y,a,b,c,4]'
These results can be controlled explicitly by specifying “item by item” or “nested”:
Example:
put [1,2,3,4] into aList
put ["a","b","c"] nested into items 2 to 3 of aList // Results in the list '[1,[a,b,c],4]'
set item 1 of aList to ["x","y"] item by item // Results in the list '[x,y,[a,b,c],4]'
The listInsertionMode local property and the defaultListInsertionMode global property, described earlier, also apply when the destination is a range of items and “nested” or “item by item” is not stated explicitly (some of the examples shown above assumed the default “item by item” setting for these properties).
You can store values into several items at once by specifying a list of indexes to store into:
Example:
set notes to ["c","d","e","f","g"]
put "#" after items [1,4] of notes // Results in the list ["c#","d","e","f#","g"]
Example:
put ["taurus","gemini","andromeda","cygnus","ursa major"] into Constellations
set items [3,1] of Constellations to ["sagittarius","orion"] // Results in the list '[orion,gemini,sagittarius,cygnus,ursa major]'
You can store a single value into multiple items at once:
Example:
put [1,2,3,4] into aList
put "Egg" into items [6,4,2] of aList // Results in the list '[1,Egg,3,Egg,,Egg]'
Deleting Items from a List by Index
Use the Delete Command to delete one or more items from a list by their index (position), using the standard chunk expression syntax. A single item, a range of items, or a list of items can be deleted in this way.
Example:
put [[100,100],[200,200],[300,300],[400,400],[500,500]] into MovetoLocations
delete item 4 of MovetoLocations // Results in the list '[[100,100],[200,200],[300,300],[500,500]]'
Example:
put ["c","d","e","f","g"] into notes
delete the last 2 items of notes // Results in the list '[c,d,e]'
Example:
put ["A","B","C","D","E","F","G","H","I"] into sections
put [2,6,8,4] into done — list of indexes to delete
delete items done of sections
put sections —> ["A","C","E","G","I"]
Deleting Items from a List by Value
The delete each command can be used to delete one or more items from a list based on their value, using an each expression.
Example:
put ["c","d","e","f","g"] into notes
delete each item of notes which is "f" // Results in the list '["c","d","e","g"]'
Example:
put [[100,150],[200,250],[300,350],[400,450],[500,550]] into MovetoLocations
delete each item of MovetoLocations where item 1 of each is a multiple of 200 // Results in the list '[[100,150],[300,350],[500,550]]'
Example:
put [22,53,60,39,42,88,17,94,15] into scores
delete each item of scores which is less than 42
put scores —> [53,60,42,88,94]
Deleting Characters from a List
Use the delete command to delete particular characters or strings of characters from the list. SenseTalk deletes the specified string of characters from each item in the list.
Example:
put [[100,100],[200,200],[300,300],[400,400],[500,500]] into MovetoLocations
delete zero from MovetoLocations // Results in the list '[[1,1],[2,2],[3,3],[4,4],[5,5]]'
put ["red", "green", "blue", "orange", "yellow", "black"] into colors
delete "e" from colors
put colors —> ["rd","grn","blu","orang","yllow","black"]
Counting the Items in a List
Use the number function to find out how many items are in a list, by asking for the number of items (if the source is known to be a list) or explicitly for the number of list items (if it may not be a list):
Example:
put the number of items in [1,3,4,5,9] --> 5
Example:
put "Akron, OH" into City
put the number of list items of City --> 1
Determining the Location of an Item in a List
The item number of ... within ... expression gives the item number of a value within a list, or zero if that item is not found in the list:
Example:
put "a".."z" into AlphabetList
put the item number of "c" within AlphabetList --> 3
The item number containing ... within ... expression gives the number of the first item in a list that contains the given value, or zero if that value is not found in the list:
put ["dog","cat","armadillo"] into Animalia
put the item number containing "c" within Animalia --> 2
Performing Arithmetic on Lists
Vector arithmetic is supported by lists.
You can add or subtract two lists of numbers, provided they are both the same length. This approach adds or subtracts the corresponding items of the two lists. Vector operations work with nested lists as well.
Example:
put [12,4,6,22] into numList
add [1,2,3,4] to numList // Results in the list '[13,6,9,26]'
Multiplication and division of lists also works for lists of equal length.
Example:
put [6,7,14,33] divided by [3,2,1,3] // Results in the list '[2,3.5,14,11]'
put [4,5,6] * [9,8,7] // Results in the list '[36,40,42]'
You can also multiply or divide a list by a single value (sometimes called a ‘scalar’ because it scales all the values in the list).
Example:
put [6,7,14,33] / 2 //Results in the list '[3,3.5,7,16.5]'
Example:
put [12 pounds,15 pounds,13 pounds] into myCatsWeights
put .75 into DietRequirements
log myCatsWeights times DietRequirements // Results in the list '[9 pounds,11.25 pounds,9.75 pounds]'
List Comparisons
The comparison operators treat lists differently than single values. The =, <>, <, >, <=, and >= operators go through lists item-by-item, comparing individual values to determine equality or inequality. For equality, there must be the same number of items in both lists, and each matching pair must be equal. For inequality, the first unequal pair of items determines the order. If the lists are of unequal length but are equal for every item in the shorter list, the longer list is considered greater. A plain (non-list) value is treated like a list with a single item when it is compared to a list.
Example:
put [3 - 2,02.00,A] = [1,2,"a"] --> True (unless caseSensitive is set)
put [1,2,2] < [1,2,3] --> True
put [1,2] is less than [1,2,0] --> True
put [1,2,3] < [1,3] --> True
put [1,2,3] < 5 --> True (because 1 is less than 5)
Example:
put ["China","Japan","South Korea","Cambodia"] equals ["China","Japan","Cambodia","South Korea"] // False
The begins with, ends with, is in, and contains operators all check for the presence of whole values or sequences of values in the list, whenever the value being searched is a list. These operators all look deeply into nested lists. When the value being looked for is also a list, its items must appear in the same order within the list or one of its sublists in order to match.
Examples:
put ["a","b","c"] begins with ["a","b"] --> True
put ["a","b","c"] begins with "a" --> True
put [1,2,3] ends with [2,3] --> True
put [1,2,3] ends with 3 --> True
put ["some","choice","words"] contains ["words","choice"] --> False
put ["some","choice","words"] contains "word" --> False
put [3,4] is in [[1,2],[3,4,5]] --> True
put [2,3] is in [[1,2],[3,4,5]] --> False (values are not in the same sub-list)
"Set-like" List Operations
These functions treat the values in lists like members of a set, performing operations on a list or two lists in a "set-like" fashion.
Unique Items
The uniqueItems function returns a list with any duplicate item values removed.
put the unique items of [3,5,4,5,6,8,8,9,1,3] --> [3,5,4,6,8,9,1]
Intersection
The intersection function returns a list containing the items that are present in both of two lists.
put the items of ["red","tan","blue","gray"] that are also in ["blue","green","red"] --> ["red","blue"]
Union
The union function returns a list containing all of the items that are present in either or both of two lists.
put the union of ["red","tan","blue","gray"] and ["blue","green","red"] --> ["red","tan","blue","gray","green"]
Excluding Items
The excludeItems function returns a list containing all of the items of one list that are not present in another list.
put the items of ["red","tan","blue","gray"] excluding those in ["blue","green","red"] --> ["tan","gray"]
Iterating Over Items in a List
To perform actions with each of the values in a list, you can step through the list’s values using a repeat with each item loop. This approach sets the it variable to each of the values of the list in turn:
Example:
repeat with each item of 1..5
log "The cubed value of "&it&" is"& it cubed
end repeat
To use a variable other than it, include a variable name after the word item:
Example:
set TestList to ["regression","smoke","performance"]
repeat with each item Test of TestList
RunWithNewResults Test
end repeat
To modify items in a list, including changing their values or even deleting them, specify by reference. This approach sets the loop variable to be a reference to each of the items instead of a copy of their values:
Example:
set numList to [10,11,12,13,14,15,16]
repeat with each item of numList by reference
if it is an odd number then delete it
else divide it by 2
end repeat
put numList --> [5,6,7,8]
Selecting List Items Using "each" Expressions
The use of each expressions to obtain a list of selected chunks of a value is described in Extracting a List of Chunks. Similarly, to extract a sublist of selected items from a list, use an each expression with a where clause:
Example:
set numList to 9..16
put each item of numList where each is an odd number --> [9,11,13,15]
put each item of numList where sqrt(each) is an integer --> [9,16]
Example:
set Locations to ["Lansing, Michigan","Portland, Oregon","Denver, Colorado","Fort Collins, Colorado"]
put each item of Locations where each contains "Colorado" into ColoradoCities // Stores a list of two items: '["Denver, Colorado","Fort Collins, Colorado"]' into a variable
For more information about each expressions, see Each Expressions and Iterators.
Applying Operations to Lists Using "each" Expressions
To perform an operation on each item in a list, giving a list of the resulting values, use an each expression (with or without a where clause) as an element of a larger expression:
Example:
set numList to [9,10,12,16]
put each item of numList + 3 --> [12,13,15,19]
put sqrt of each item of numList --> [3,3.162278,3.464102,4] (applies the sqrt() function to each number in the list)
put each item of numList * [2,9,3,4] --> [[18,81,27,36],[20,90,30,40],[24,108,36,48],[32,144,48,64]]
Example:
put [1000 dollars, 5500 dollars, 3600 dollars] into InitialSavings
put each item of InitialSavings * compound(.95%,12) rounded to 2 into FinalSavings // Uses the compound() function to calculate the interest, and stores the resulting list '[$1120.15,$6160.82,$4032.54]' into the FinalSavings variable
These expressions can be complex, with multiple operations being applied to each item from the each expression. Enclosing parentheses limits the scope of the each expression: operators within the parentheses apply to each item of the list; operators outside the parentheses apply to the list as a whole.
Sorting the Items in a List
To sort a list, use the sort command or sorted operator. Sorting a list can be as easy as:
Example:
set planets to ["Mars","Saturn","Venus","Earth"]
sort planets // Sorts the items of myList into ascending (alphabetical) order.
put planets --> [Earth,Mars,Saturn,Venus]
Additional sort options can also be given, including indicating order and options to evaluate property values of lists within the list (see the description of the Sort command for more information):
Example:
put [{age:14,name:"Monica"},{age:22,name:"Brad"},{age:9,name:"Sam"},{age:12,name:"Michael"}] into siblings //This is a list of property lists
sort siblings in descending numeric order by the age of each
put siblings --> [{age:"22", name:"Brad"},{age:"14", name:"Monica"},{age:"12", name:"Michael"},{age:"9", name:"Sam"}]
You can sort a list on-the-fly using the sorted operator:
Example:
put [90,88,92,98,91] into Scores
put the first three items of (Scores sorted in decreasing order) --> [98,92,91]
Reversing or Shuffling the Items in a List
A list can be reversed using the Reverse command or function.
put the reverse of ["extreme","high","medium","low","trivial"] --> ["trivial","low","medium","high","extreme"]
The items in a list can be shuffled into a random order by using the Shuffle command or function.
put ["apples","oranges","tomatoes","cereal"] shuffled --> ["oranges","tomatoes","cereal","apples"]