メインコンテンツまでスキップ
バージョン:23.4

Working with Android Mobile Devices

Overview

As discussed in Connecting to Mobile Devices, Eggplant Functional has extensive support for testing Android mobile devices. Using Eggplant's Android Mobile Device Connections, you can test Android mobile devices which are directly connected to the machine running Eggplant Functional. The Android devices may be physical devices or emulators. Additionally, you can test cloud-hosted Android mobile devices which are hosted by Sauce Labs. This section will discuss concepts related to testing mobile devices which are connected directly to the system running Eggplant Functional. Please refer to Connecting to Sauce Labs Real Devices and Virtual Browsers for details on working with cloud-hosted Android mobile devices.

ノート

The Mobile Device Connections only support connections to devices directly from the machine which is running Eggplant Functional. If you have a need to host your devices from a shared network address which is not co-hosted on the same machine as Eggplant Functional, you must use Eggplant's Classic Android Gateway application. Please refer to the user guide for the Classic Android Gateway application for details on how to setup and use the application.

Getting Android Mobile Device IDs

In some cases, you will need the Android Device ID before you can create a Mobile Device Connection for Android devices. This section describes how to get your Device ID for physical devices. If you are trying to connect to an emulated device, please see Connecting to Android Emulators for details on how to obtain device IDs for emulated devices.

If you have a single Android mobile device that you want to test, Eggplant Functional is capable of auto-discovering the device when you connect it to Eggplant Functional and create a Mobile Device Connection. If you have more than one Android mobile device that you want to test, however, you will need to use the Device ID in order to differentiate between the devices. This section describes how to obtain the Device ID for Android mobile devices.

There are multiple methods to locate the Device ID on your Android phone. One of the following methods should work for you:

  • On your phone dial pad enter *#*#8255#*#*. After you enter the last digit, the GTalk Service Monitor will open and the Device ID will be displayed in the resulting information. (Note that the displayed Device ID may have the string android- prepended. Please ignore the prepended string. You will need only the hexadecimal digits that follow the android- string.)
  • If you have the Android Debug Bridge installed on your system, you can use the adb devices command to get a list of the devices which are currently connected to your system (see Query for devices in the adb documentation). Just make sure the devices are connected to your system before you execute the command.
  • If the above methods do not work, there are Apps that let you read your Device ID. Just visit your Android App store and search for "Device ID".

However you obtain the Device ID, please copy the information. You can specify the Device ID when you create the connection in Eggplant Functional.

ノート
  • As a reminder, you only need the Device ID if you plan to connect multiple Android Devices simultaneously. If you only have one device connected at a time, Eggplant Functional can discover the device without needing the Device ID.
  • Do not confuse the Device ID with the Serial Number. They are not the same. If you try to use a Serial Number in place of the Device ID, your connection will fail.

Connecting to Android Emulators

Eggplant Functional's Mobile Device Connections work seamlessly with Android devices which are emulated via Android Studio. To connect to an emulated device, you must be running Android Studio on the same system on which you are running Eggplant Functional. Before you attempt to connect, you need to launch the Android virtual device in Android Studio.

If you have only one Android virtual device running, you can proceed to connect using Eggplant Functional's Mobile Device Connection without having to know the Device ID. In cases where there is only one device attached to your computer, Eggplant Functional is able to discover the device and will connect to it without needing the Device ID.

If you have, or will have, multiple Android virtual devices running simultaneously, you'll need to specify the Device ID when you connect. To get the Device ID from your emulator, open the Extended Controls for your device and click on "Help" in the left-hand panel of the Extended Controls window. You should see the "Emulator ADB Serial Number" displayed. Use that value as the Device ID when you attempt to connect to your device. An example is shown below for Android Studio Electric Eel (2022.1.1).

Getting Device IDs for Emulated Devices

ノート
  • The Android emulator shows the Device ID under the heading "Emulator ADB serial number". Despite the heading, this is the correct Device ID.
  • The Device ID for virtual devices is set by Android Studio and can change from session to session. Furthermore, if you have multiple emulators running, the ID assignment depends on the order in which you launch your devices. This behavior makes it problematic if you are explicitly specifying a Device ID in Eggplant. To avoid Device IDs changing unexpectedly, you should either only run one emulated device at a time, in which case, you do not need to specify a Device ID OR you must be sure to always launch your emulated devices in the same order. If it works for your use-case, we recommend only having one emulator running at a time so that you do not need to rely on Device IDs.

Configuring Your Android Mobile Device for Automation

In order to have the best test automation experience on your Android mobile device, you need to configure the device appropriately. This section describes the configuration activities that you need to perform on your Android mobile device before you try to run test automation against it for the first time.

Enable Developer Mode

Before connecting to your Android device with Eggplant Functional, you must enable developer mode on your device. The instructions to enable developer mode on your Android device may vary depending on your distribution. Please refer to Enable Developer options in the Android Studio User Guide for details on how to enable developer mode.

Configure USB Debugging

Before connecting to your Android device with Eggplant Functional, you must enable USB debugging on your device. Please refer to Enable USB debugging on your device in the Android Studio User Guide for details on how to enable USB debugging.

Enable Mock Location

In order to allow the Eggplant SetDeviceLocation SenseTalk command to work when necessary, you will need to enable Mock Location on your Android device. Please refer to Debugging in the Android Studio User Guide for details on how to enable mock locations.

Manipulating Your Android Mobile Device

Once you connect to an Android mobile device via Eggplant Functional's Android Mobile Device Connection, you can manipulate your device using Eggplant's image-based commands and Eggplant's mobile WebDriver commands. Both of these capabilities are automatically available in the single Mobile Device Connection.

To use mobile WebDriver functionality on your Mobile Device Connection, simply create (or activate) a new Mobile Device Connection. Then, you can send any mobile WebDriver-based SenseTalk command to your device. You can also use several of Eggplant's mobile control and touch event commands to manipulate your mobile device. Please refer to SenseTalk Mobile Control and Touch Events for more details.

To learn how to automate your mobile device from Eggplant Functional scripts, see the following resources: