Injector Family Configuration

Use the Create an Injector Family wizard to configure the common options for the selected injector family. The settings you choose here apply to any injectors you create in this injector family.

You start with initial settings based on the choice you made on the previous screen as your configuration starting point, however, you can change any of the settings on this page .

The configuration options varies based on the injector family you select. For example, your options are different for a Cloud injector family versus a Static injector family. For more information, see the following topics:

For configuring Static injector families, see Configuring Static Injector Families.

For configuring Public Cloud injector families, see Configuring Public Cloud Injector Families.

For configuring Eggplant Cloud injector families, see Configuring Eggplant Cloud Injector Families.

When you've set your options, click Create to create the injector family.


This topic was last updated on January 13, 2022, at 02:42:23 PM.

Eggplant icon | Documentation Home | User Forums | Support | Copyright © 2022 Eggplant