Elements of the SenseTalk Pattern Language
The SenseTalk pattern language lets you define patterns that you can use to match strings in text. As explained in SenseTalk Pattern Language Basics, the pattern matching capabilities are built on top of regular expressions (regex). The SenseTalk pattern language lets you define patterns in easy-to-read syntax.
You can create pattern definitions for simple patterns, such as the occurrence of any three digits. You can also define patterns for complex patterns that have optional or alternative portions, and that can have varying lengths. Every pattern, however simple or complex, is built from a number of basic pattern elements.
Pattern Language Syntax
Pattern definitions in the SenseTalk pattern language consist of the pattern description enclosed in angle brackets (< ... >).
Syntax:
{pattern} < patternLanguageExpression >
Note the word pattern is optional with the pattern language and typically will be omitted.
A pattern definition — represented in the syntax above by patternLanguageExpression — can be a single element, such as 7 digits to find any occurrence of seven digits in a row. However, most patterns will include a sequence of elements, or subpatterns. The sequence is specified by listing each subpattern one after another separated by commas, separated by the word then, or separated by listing each element on a new line (or some combination of these options).
Therefore, the following examples are all equivalent methods of representing a pattern definition for a Social Security identification number:
set ssn to <3 digits then "-", 2 digits then "-", 4 digits>
set ssn to <3 digits, "-", 2 digits, "-", 4 digits>
set ssn to <3 digits then "-"
2 digits, "-",
then 4 digits>
You can use the word or to specify alternative choices in a subpattern. For example,
<"cat" or "cow">
matches either cat or cow.
You can use parentheses to group elements when necessary. For example,
<"cat" or "cow" then 2 digits>
matches text like cat24 or cow17. But
<"cat" or ("cow" then 2 digits)>
matches either cat (with no digits needed) or something like cow97.
Pattern Elements
A pattern definition is made up of individual elements, or subpatterns. An element can be the characters included in a quoted string, such as "cat". It can also be a SenseTalk variable, an expression in parentheses, or one of several pattern elements described in the Pattern Definition Elements table below.
Note the following about how elements can be defined:
- Most pattern elements can be singular or plural.
- Singular elements match exactly one of the specified value.
- Plural elements match a sequence of one or more of the indicated value.
- Quantifiers can be used to explicitly control the number of characters or values you want an element to match.
Pattern Definition Elements
| Elements | Definition |
|---|---|
| "quoted string" | Matches an exact string of characters |
| variable | Use any valid element or combination of elements stored in a variable |
| expression | Use any SenseTalk expression, in parentheses, that yields a string |
charactercharacters | Matches any characters |
letterletters | Matches letters of any alphabet |
nonletternonletters | Matches characters other than letters of an alphabet |
lowercase letterlowercase letters | Matches lowercase letters in any language |
nonlowercase letternonlowercase letters | Matches letters other than lowercase letters in any language |
uppercase letter, capital letteruppercase letters, capital letters | Matches uppercase letters in any language |
nonuppercase letter, noncapital letternonuppercase letters, noncapital letters | Matches letters other than uppercase letters in any language |
digitdigits | Matches digits from 0 to 9 |
nondigitnondigits | Matches characters other than digits |
letterOrDigit, alphanumericlettersOrDigits, alphanumerics | Matches either letters or digits |
nonLetterOrDigit, nonAlphanumericnonLettersOrDigits, nonAlphanumerics | Matches characters other than letters or digits |
whitespace characterwhitespace characters | Matches white space characters (space, tab, line separator, etc.) |
nonwhitespace characternonwhitespace characters | Matches characters other than white space characters |
word characterword characters | Matches word characters (letters or digits) |
nonword characternonword characters | Matches characters other than word characters |
punctuation characterpunctuation characters | Matches punctuation characters |
nonpunctuation characternonpunctuation characters | Matches nonpunctuation characters |
| character [of | in | from] characterSet characters [of | in | from] characterSet | Matches characters that are in the characterSet (string, range, character class identifier, or list of these items) |
| character not [of | in | from] characterSet characters not [of | in | from] characterSet | Matches characters that are not in the characterSet |
You can abbreviate character as char, and characters as chars, in all cases.
Quantifiers and Elements
When you specify a singular pattern element, such as letter or digit, exactly one of that type of element creates a match for the pattern. Specifying a plural form, such as letters or digits, indicates that one or more of that element can create a match.
In addition, there are a number of quantifiers that you can use to specify how many times an element should appear to create a pattern match.
The following descriptions use the term character for simplicity, but any element term can be used.
Terms that Mean Exactly One Character
character
a character
one character
exactly one character
Example:
set myPattern to < "(" then a character then ")" >Matches sequences like:
(w)( )(7)(.)())Doesn't match:
()(42)(salamander)otherStuff
Terms that Mean an Exact Number of Characters
2 characters
exactly 2 characters
The number 2 is shown in these examples, but any positive integer can be used. A variable whose value is an integer can also be used, but the word exactly must be used in this case.
Example:
set myPattern to < "(" then 2 characters then ")" >Matches sequences like:
(42)(CO)(())Doesn't match:
()(w)( )(7)(.)())(salamander)otherStuff
Terms that Mean Zero or One Character
maybe character
maybe a character
maybe one character
zero or one character
zero or maybe one character
Example:
set myPattern to < "(" then maybe a character then ")" >Matches sequences like:
()(w)( )(7)(.)Doesn't match:
(42)(salamander)otherStuff
This pattern can also match ()) but as a lazy quantifier it will prefer to match just () unless it needs to match all three characters in some context.
Terms that Mean One or More Characters
characters
some characters
one or more characters
Example:
set myPattern to < "(" then characters then ")" >Matches sequences like:
(w)( )(7)(.)())(42)(salamander)Doesn't match:
()otherStuffIn the sentence "Amy (a woman) and Flossie (her cat) lie down to take a nap.", this pattern will match two strings:
(a woman)and(her cat)
Terms that Mean Zero or More Characters
maybe characters
maybe some characters
zero or more characters
Example:
set myPattern to < "(" then zero or more characters then ")" >Matches sequences like:
()(w)( )(7)(.)(42)(salamander)Doesn't match:
otherStuff
This pattern can also match ()) but as a lazy quantifier it will prefer to match just () unless it needs to match all three characters in some context.
In the sentence "Amy (a woman) and Flossie (her cat) lie down to take a nap.", this pattern will match two strings:
(a woman)and(her cat)
Terms that Specify a Minimum Number of Characters
at least 2 characters
2 or more characters
2 or maybe more characters
at least 2 or more characters
at least 2 and maybe more characters
The number 2 is shown in these examples, but any positive integer can be used. A variable whose value is an integer can also be used in place of a specific number.
Example:
set myPattern to < "(" then 2 or more characters then ")" >Matches sequences like:
(42)(salamander)Doesn't match:
()(w)( )(7)(.)())otherStuffIn the sentence "Amy (a woman) and Flossie (her cat) lie down to take a nap.", this pattern will match two strings:
(a woman)and(her cat)
Terms that Specify a Minimum and Maximum Number of Characters
2 to 4 characters
from 2 to 4 characters
A range of 2 to 4 is shown in these examples, but any range of positive integers can be used. A variable whose value is an integer can also be used in place of either or both numbers.
Example:
set myPattern to < "(" then 2 to 4 characters then ")" >Matches sequences like:
(42)Doesn't match:
()(w)( )(7)(.)())(salamander)otherStuff
Lazy vs. Greedy Quantifiers
When you create a pattern that can match a varying number of values, the match can be either lazy or greedy. A lazy subpattern matches as few occurrences as possible while still providing a match to the overall pattern. A greedy subpattern matches as many as possible.
In SenseTalk, pattern matches are lazy by default. So the pattern
< "(" , characters , ")" >
will match a sequence beginning with ( followed by one or more characters up to and including the first occurrence of ) that is encountered. The pattern
< "(" , lots of characters , ")" >
on the other hand, will match a sequence beginning with ( then greedily consume as many characters as it can, up to and including the final occurrence of ) in the source text.
Example Sentence
To illustrate the difference, consider this example sentence:
Amy (a woman) and Flossie (her cat) lie down to take a nap.
And this pattern:
< "(" then one or more characters then ")" >
Now, assuming the example text is read into a variable, myText, the following code would return two values:
set myPattern to < "(" then one or more characters then ")" >
put every occurrence of myPattern in myText into myList
put mylist
Output: ["(a woman)","(her cat)"]
It works this way because one or more characters in SenseTalk is lazy — it consumes the smallest number of characters needed to satisfy the pattern.
However, sometimes you might need to create a greedy match. The greedy behavior can be achieved in this example by changing the pattern to this:
< "(" then one or preferably more characters then ")" >
By specifying that you prefer to have the pattern match more characters if possible, the expression every occurrence of myPattern in myText now returns just one value that includes everything from the first ( to the last ):
Output: ["(a woman) and Flossie (her cat)"]
Terms that Mean Zero or One Character, But Prefer One
preferably character
preferably a character
preferably one character
zero or preferably one character
Example:
set myPattern to < "(" then preferably a character then ")" >Matches sequences like:
()(w)( )(7)(.)())Doesn't match:
(42)(salamander)otherStuff
If the pattern encounters ()), it will greedily match all three characters unless it's in a context where the second ) is needed to satisfy a later part of the pattern, in which case it will match just ().
Terms that Mean One or More Characters, But Prefer as Many as Possible
lots of characters
preferably lots of characters
one or lots of characters
one or preferably lots of characters
one or preferably more characters
Example:
set myPattern to < "(" then lots of characters then ")" >Matches sequences like:
(w)( )(7)(.)())(42)(salamander)Doesn't match:
()otherStuffIn the sentence "Amy (a woman) and Flossie (her cat) lie down to take a nap.", this pattern will match the single string:
(a woman) and Flossie (her cat)
Terms that Mean Zero or More Characters, But Prefer as Many as Possible
preferably characters
maybe lots of characters
zero or lots of characters
zero or preferably lots of characters
zero or preferably more characters
Example:
set myPattern to < "(" then zero or preferably more characters then ")" >Matches sequences like:
()(w)( )(7)(.)())(42)(salamander)Doesn't match:
otherStuff
If the search encounters ()), this pattern will greedily match all three characters unless it's in a context where the second ) is needed to satisfy a later part of the pattern, in which case it will match just ().
In the sentence "Amy (a woman) and Flossie (her cat) lie down to take a nap.", this pattern will match the single string:
(a woman) and Flossie (her cat)
Terms that Specify a Minimum Number of Characters, but Prefer as Many as Possible
at least 2 or lots of characters
2 or lots of characters
2 or preferably lots of characters
2 or preferably more characters
at least 2 and preferably lots of characters
at least 2 and preferably more characters
The number 2 is shown in these examples, but any positive integer can be used.
Example:
set myPattern to < "(" then 2 or preferably more characters then ")" >Matches sequences like:
(42)(salamander)Doesn't match:
()(w)( )(7)(.)())otherStuffIn the sentence "Amy (a woman) and Flossie (her cat) lie down to take a nap.", this pattern will match the single string:
(a woman) and Flossie (her cat)
Terms that Specify a Minimum and Maximum Number of Characters, but Prefer as Many as Possible
2 to 4 characters greedily
from 2 to 4 characters greedily
A range of 2 to 4 is shown in these examples, but any range of positive integers can be used.
Example:
set myPattern to < "(" then from 2 to 4 characters greedily then ")" >Matches sequences like:
(42)Doesn't match:
()(w)( )(7)(.)())(salamander)otherStuff
Explicitly Forcing Greedy or Lazy Behavior
You can use the terms greedily or lazily after any term that represents a variable number of characters to explicitly enforce greedy or lazy behavior. When used, these terms always take precedence, regardless of the usual behavior of the preceding term.
Here are a few examples to illustrate this behavior:
maybe a character greedily -- Zero or one, but prefers one
some characters greedily -- One or more, but prefers as many as possible
lots of characters greedily -- One or more, but prefers as many as possible (the usual behavior made explicit)
lots of characters lazily -- One or more, but prefers as few as possible (overriding the usual behavior)
Greedy Synonyms
All of these terms can be used interchangeably when specifying a greedy quantifier:
lots, lots of, many, max, maximum, the maximum number of, the most
Case Sensitivity in Patterns
Text comparisons in SenseTalk are typically not case sensitive, as explained in Expressions. This behavior also applies to pattern matches. Therefore, when your pattern looks for letters, a match is met whether the letters are capitals or lowercase. You can change the default behavior to require case sensitivity by using the caseSensitive local property.
Most comparison operators also allow case-sensitivity to be specified directly as an option of the operator, which overrides the global setting. These options apply to pattern comparisons as well as ordinary text comparisons, as shown in the following example:
put <3 chars from "ABCDEF"> matches "fab" --> True
put <3 chars from "ABCDEF"> matches "fab" case sensitive --> False
Case-Sensitivity Settings Within a Pattern
You can incorporate case-sensitivity settings directly into a pattern definition. These in-line settings always take precedence over the default settings or options specified in the command. You can include these options within a pattern for fine-grained control over case-sensitivity in different parts of the pattern.
Case-Sensitivity Elements Syntax:
case sensitive -- All later elements of the pattern must be case sensitive
case insensitive -- All later elements of the pattern won't be case sensitive
case sensitive: element -- The specified element must be case sensitive
case insensitive: element -- The specified element won't be case sensitive
case sensitive: ( subPattern ) -- The specified subpattern must be case sensitive
case insensitive: ( subPattern ) -- The specified subpattern won't be case sensitive
Wherever case sensitive is shown, any of its synonyms can be used: case-sensitive or caseSensitive or considering case or with case.
Wherever case insensitive is shown, any of its synonyms can be used: case-insensitive or caseInsensitive or ignoring case or without case.
Example:
put "abc" matches <case sensitive, 3 chars from "DCBA"> --> False
Example:
set partNum to <"ABC", digit, case-sensitive: char in "JQXZ", digit>
put partNum matches "Abc9Q2" --> True ("ABC" is not case sensitive)
put partNum matches "ABC7x3" --> False ("x" is not capitalized)
Example:
set code to <with case, character of "ABC", ignoring case, character of "XYZ">
put "aZ" matches code --> False ("a" must be uppercase to match)
put "Bx" matches code --> True ("x" can be upper- or lower-case)
The case-sensitivity indicator, when present, is effectively not part of the pattern definition itself, but rather affects the entire definition to which it applies. Therefore, specifying a case-sensitivity value doesn't consume characters from the source text for making matches of the pattern.